Join our mailing list!






Home > Antistatic > Education, Awareness, and Accessories > ESD Badge Holders
Sort By:
1
Menda 34431
Menda 34431

  • ESD STRAP CLIP, 2-7/8''
  • Made with a custom dissipative material made exclusively for Desco Industries and not available anywhere else!
  • Rtt: 1 x 106 to < 1 x 1011 ohms per ANSI/ESD STM11.11
  • Tribocharging: Less than 100 volts
  • ESD Protective Symbol allowing people to immediately know the strap clip is ESD protective
  • Rust-Resistant Nickel-plated steel clip
  • Stock Location: CHINO, CA
Menda 34432
Menda 34432

  • Made with a custom dissipative material made exclusively for Desco Industries and not available anywhere else!
  • Rtt: 1 x 106 to < 1 x 1011 ohms per ANSI/ESD STM11.11
  • Tribocharging: Less than 100 volts
  • ESD Protective Symbol allowing people to immediately know the strap clip is ESD protective
  • 3-1/2" long strap clip
  • Stock Location: CHINO, CA
Menda 35006
Menda 35006

  • BADGE HOLDER, DUAL, SHIELDED, 2-1/4''W X 3-1/2''L (IS)
  • Designed to shield RFID signals to protect against any unauthorized contactless access to information stored on a PIV Card.
  • Protects two smart cards against information and identity theft. No need to remove the card from the holder. Smart Cards slide in and the user swivels the card slightly to the left or right to transmit the card’s encoded data.
  • Provides a barrier to invasive or unwanted communications with the card and puts the user in control of where and when the card is read.
  • Meets FIPS 201 SLV.1 Test Requirements
  • Made of durable, lightweight vinyl
  • Stock Location: CHINO, CA
Menda 35008
Menda 35008

  • BADGE HOLDER, SHIELD ID II,SGL POCKET, MAGNET,2-1/4''x3-1/2''
  • FIPS 201 Approved - Approved Products List (APL) #577
  • Shields 13.56 MHz RFID Technology smart cards including MIFARE, iClass, PIV, CAC, TWIC and FRAC
  • Protects smart cards from information and identity theft
  • No need to remove card from the holder. Simply flip it away from the shield to transmit the card's data. Release the card and the magnet will pull it right back to its protected state.
  • Made of durable, lightweight vinyl
  • Stock Location: CHINO, CA
Menda 35193
Menda 35193

HOLDER, ARM BADGE, ESD, 2-3/8INX3-3/8IN (IS), BLACK
   
 
1